Kimber’s Micro .380 ACP pistols were not new for 2014 but they were available for testing at SHOT Show Media day 2014. The Micro includes many proven 1911 design elements that make them comfortable to carry, quick and safe to operate, and easy to shoot accurately.
Weighing just 13.4 ounces and with a barrel length of only 2.75 inches, they are ideal for concealed carry. Like most 380 pistols, the recoil was light and easy to handle. Sights were easy to pick up accuracy was good for a small pistol. If you have big hands this gun is probably not for you, I have average size hands and it was easy to control and manipulate for me.
Weighing less than 14 ounces empty. Slides on the Stainless and CDP models as well as all Micro barrels are machined from stainless steel for resistance to moisture and corrosion. All Micro frames are carved from aluminum.
In many ways the Micro is a miniature 1911, among the most important Micro design features is a single action trigger with a short, smooth pull that delivers accuracy and instills confidence. The thumb safety, slide release and magazine release are pure 1911.
Standard features include a lowered and flared ejection port for flawless ejection and a beveled magazine well for fast, positive loading. These are items that many shooters pay a lot of money to have added to a gun. Sights are steel mounted in machined dovetails for durability. Each Micro includes a flush-fitting 6-round magazine and an extended 7-round magazine is available as an accessory.
Filed under Firearms, Pistol
Here is a sad fact about emergency situations: Without extensive daily training chance are your initial reaction will be less than perfect. In the case of life threatening situations, because of fear, panic, or adrenalin, 93 percent of first shots fired miss the intended target. This is easy to understand.
In the best of circumstances we all have a slight twitch when firing a gun. The best marksman learn to minimize the flinch or twitch. For instance, if your twitch puts you just 2 degrees off target at 20 feet you will be 9.1 inches off your intended point of aim. Obviously that is enough to cause a miss.
These facts caused the folks at Multiple Impact Bullets to invent a bullet that makes if for more likely a first shot will hit the target. A bullet enhanced with Multiple Impact™ Technology (a prior-to-impact expansion technology) is designed to compensate for most if not all of the typical marksman’s error caused by Last Second Twitch.
The new design divides a single projectile into 3 interconnected segments that will spread to a predetermined orientation and finite diameter when fired. Once deployed, the segments of the proprietary Wide Envelopment Bullet™ (W.E.B™) are tethered together (like a spider web), to offer the shooter a much wider impact zone, reducing the occurrence of missed shots and thereby reducing the risk of collateral damage. (A standard .45 cal slug is .452 inches in diameter and remains that way until it collides with something, where as a T3™ round of the same caliber can be made to expand (instantly upon leaving the barrel) to a predetermined diameter (range 6 “ to 16 “ or greater).
This one of a kind Accelerated Radial Spread™ makes possible a wide spread pattern that ensures a high hit probability for each and every shot, resulting in unprecedented accuracy/hit probability, ensuring the shooter a greater tactical advantage.
26 Nosler is a new cartridge design, it actually fills a niche in the factory cartridge world. Between the WSM cartridges and the RUM cartridges, the first being short action, the latter being full length magnum. So the 26 Nosler is in between.
This may not sound like a big deal but it was a very good idea for a 6.5mm Magnum. When the 7mm or 300 Remington Ultra Mag is necked to 6.5mm it’s not very satisfactory. The case capacity is far overbore for the 6.5mm bore, so accuracy suffers and finding a good load is difficult.
By reducing case capacity as Nosler has done with this new design they have brought the balance between bore and capacity back into a range where load development is easier and barrel life will be better than with the full length RUM wildcat such as the 6.5MM UltraCat originated by Z-Hat Custom back in 1999.
Designed with a maximum cartridge O.A.L. of 3.340”, the 26 Nosler cartridge functions in a standard length magnum action with a 3.400″ magazine box. It is very similar in length to a 300 Winchester magnum case. This equates to a shorter bolt through and lighter weight gun than with the full length magnums like the 300 H&H or 7mm RUM.
The 26 Nosler is capable of pushing a 130gr bullet at a Muzzle Velocity of 3400 fps according to Nosler. With that kind of velocity bullets must be made for the extra stress that velocity will bring to the jacket. No disrespect to Nosler but this is a job for a NorthFork Bullet if I ever saw one.
The 26 Nosler is a non-belted, 6.5mm centerfire rifle cartridge. With a useable case capacity of 93 grains of water, the 26 Nosler is speedy, it outperforms the 264 Win Mag by over 200 fps with a 130 gr bullet. Loaded with the 129gr AccuBond-LR, the 26 Nosler retains as much velocity at 400 yards as the 260 Remington produces at the muzzle.
Zeroed at 350 yards, the 26 Nosler has a maximum point blank range (PBR) of 415 yards. It appears from the chart at the right that Nosler is figuring 5 inches +or- form zero to get to that 415 yard point blank range.
Nosler’s choice of a 6.5mm cartridge is a good one, sectional density and high ballistic coefficients make 6.5mm a good bet. Retained energy and accuracy at long range is always good with a 6.5mm. This will be a good cartridge for wide open western hunting for deer class animals. Thumbs Up!
Found this little goodie at Media Day for Shot Show. You might imagine seeing the Sharps name that has always been associated with single shots and then seeing nothing but AR-15 rifles in the booth. I took a double take… which is probably what they were hoping for all the writers that visited the event.
Having been in the gun business for so many years I have seen the rebirth of many company names. Some have been successful and others have quickly died away. No telling what will happen with this new company. Sharps Rifle Company (SRC) is one of several brands, (five at present) under the one roof.
Turns out the item of interest was the 25-45 SRC cartridge. This is the most recent iteration of a wildcat most commonly known as a 25/223 Remington. Another well known variation came out in 1987 as the 25 TCU (Thompson Center Ugalde). The TCU version was designed for metalic silhouette competition. Of course that cartridge was intended for use in a 14″ barrel from a Contender pistol. While they are not interchangeable the two cartridges are very similar. Ahh, what’s old is new again. I sense a theme here.
- 65 Grain Rapid Expansion Varmint is advertised at 3300 feet per second from a 20″ barrel.
- 87 Grain soft point or FMJ loads are advertised at 3000 feet per second also from a 20″ barrel.
Of course, headstamped brass and commercially loaded ammo is always a selling point and SRC is offering just that. For more information on the brands and products associated with SRC click here.
DuraCoat is finally available in an aerosol can. This new aerosol was made possible by the development of this new “can in a can” technology which allows the components to mix inside the can.
This product differs from some other finishing products in that the product is activated, so it must be used within 48 hours of activation. Some gunsmiths and hobbyist are concerned about buying large quantities of product. For small shops this may be a great answer to that inventory problem.
Colors available in this new form are Matte Black, OD Green, Pink Lady, Magpul flat Dark Earth, White, Black-Hawk Coyote Tan, Combat Gray, and Woodland Green. Each 12 ounce can contains enough material to coat two rifles.
Available from www.lauerweaponry.com
This new variation on the Axis XP features the AccuTrigger, which is adjustable from 2.5 to 6 pounds. The rifle will come with a Weaver Kaspa scope mounted and bore sighted. This is a 3-9×40 variable scope.
Barrels are 22 inches, matte blue on all metal surfaces. The stock is a black molded synthetic. A detachable five rounds magazine rounds out the package. Eight calibers from 223 to 30-06 are offered. MSRP is only $415
Axis barrels can be changed out just like the popular Savage 110 type barrels. In fact our friends at 4D Reamer Rentals LTD. tell us that the barrels are interchangeable. 4D offers Savage pre-fit barrels in more calibers than any other maker we have found. So you can swap the barrel on one of these rifles and have the caliber of your dreams.
Rumor has it that 4D will be introducing a new barrel nut wrench, at the SHOT Show, for Savage smooth barrel nuts, like those found on the Axis series of rifles.
Finally, Savage is offering Youth models on the new Axis II XP series. These rifles will have a 20″ barrel chambered for 243 Winchester. Two camo patterns will be offered: A woodland pattern and the very popular “Muddy Girl”.
Taurus is showing a new variation on their model 85 called the “View”. It sports a translucent panel where the side plate would normally be, allowing a view of the mechanism as the gun is cycled. Designed for concealed carry it utilizes an aluminum frame and a titanium cylinder to hold weight down.
Chambered for 38 Special this ultra-light revolver holds five rounds. Empty it weighs in at only nine ounces. With a snub nose 1.41″ barrel a round but and spur-less hammer this revolver would be easy to carry. The side plate is a gimmick but one that many shooters would like. Top it all off with a double action trigger pull of 10 pounds.
Magnum Research is offering a new compact version of the 1911 for 2014. Dubbed the “Undercover” model, or the 1911U this variant is a Series 70 style. The DE1911U is built on an ultra lightweight frame made of aircraft grade aluminum alloy and features a 4140 high carbon steel slide and adjustable rear sight for windage and elevation. The .45 ACP DE1911U has 6+1 round capacity, an overall length of 6.85″, a 3″ barrel, height of 5″, and weighs just 25.8 oz.
Standard features include checkered front and back strap, double diamond checkered wood grip, and stainless steel hex screws. The DE1911U also has a high-rise beavertail safety, skeleton hammer, and an aluminum trigger. It comes standard with two 6-round magazines.
X-Bolt Eclipse Hunter from Browning as the name suggests is a bolt action. It features a matte blue finish on the barrel and receiver. Mounted in a gray laminated wood thumb-hole, monte carlo style stock, the barrel is free-floated. The magazine is a detachable rotary design.
Other features include an adjustable trigger and 60 degree bolt lift.
Calibers available for 2014:
- 243 Winchester
- 7mm-08 Remington
- 308 Winchester
- 25-06 Remington
- 270 Winchester
- 7mm Remington Magnum
- 300 Winchester Magnum
- 300 WSM
- 270 WSM
Filed under Firearms, Rifles
In conjunction with Cooper Firearms of Montana, Colt, is expanding the M2012 bolt action rifle family with the introduction of two new models. The M2012MT308T and M2012LT308G/M2012LT260G.
“The durability and accuracy provided by the M2012 bolt action rifle family is outstanding,” said Joyce Rubino, Vice President of Marketing for Colt. “These new ‘crossover’ rifles transition easily from target shooting at the range to long-range hunting in the field.
All M2012 models feature a custom fluted, match grade barrel and a single stage, adjustable Timney trigger. A signed, serial numbered and dated test target is included with each rifle as a testament to its accuracy. The new variations are available in 260 Remington as well as 308 Winchester.
Peep sights have long been the best choice for accuracy with iron sights. When peep sights are made for rugged use that only enhances their desirability. Skinner Express Sights fall into that category.
Machined from solid bar stock the most recent additions to the Skinner line-up are tough as nails. Models availble include: Marlin 1895 and 336, Remington 740 or 760 and variants, Ruger 10-22, Rossi, Winchester, Browning, TC, and many more.
Adjustable for windage and elevation. These sights are low profile and easy to install. Winged sight are available in some models, in case your really hard on your sights, or you carry your rifle in a scabbard.