Monthly Archives: December 2013

Expected New Light Weight Revolver from Chiappa, 2014

New from Chiappa, the PolyLite™ Rhino was shown to wholesalers at the (NASGW) Expo.  The new revolver is a variation of the existing Rhino line, obviously seeking to capitalize on the CC market.  This lighter gun with a relatively slim profile may well find a niche with self defense folks.

Rhino by Chiappa

The PolyLite Rhino should look very similar to the other 2″ guns in the companies line up.

The PolyLite™ Rhino will be available only in .38 Special, unlike the other revolvers in this series of guns which come in 357 Magnum.  Pre SHOT Show, it’s not known if the revolver will be rated for +P, or standard pressure ammo only.  The six round cylinder appears similar in size to the existing Rhino revolvers.  Expect a shortened cylinder to prevent loading of .357 cartridges.

A 2″ barrel model will be introduced first.  No indication whether longer barreled PolyLite™ revolvers will be produced in the future.   Black is the only available color for the new design.  If the guns sell well, other frame colors are always a possibility.  The guns use a red fiber optic front sight and a fixed rear notch.  

We will try to get a look at this one for you at SHOT.

Leave a comment

Filed under Firearms, Pistol, Shooting

Life is Too Short for Ugly Bolt Handles

Ugly Bolt HandleUgly Bolt handles are common on “sporterized” rifles from the 50’s, 60’s and 70’s.  Fewer gunsmiths forge bolt handles these days than they used to.  Forging is the process of heating and bending a military bolt handle to create something more like a commercial gun for sporting use might have. 

The main reason for forging a bolt handle is to make it work with a scope.  Military bolt handles are often straight or have a 90º downward bend.  This works fine for a military rifle with iron sights, not so great with a scope.

Once the bolt handle is forged into the new shape it must be filed and cleaned up to have an aesthetically pleasing look.  However, many hobby smiths or guys who are new to the business are not clear on how to do this work and make it look nice.

Some military bolt handles are a little short for forging.  A good gunsmith will notice this and will either weld in an extension to make the handle longer, or replace the handle with a better design.

There are several choices for bolt handles in the market place, some are easier to work with than others but they can all produce a nice functional handle with an attractive appearance.  Some require more shaping and forming than others.

Dakota bolt handles are the easiest I have found to work with and consistently get an attractive finished product with a reasonable amount of work.  They are available in 5 different styles.

  • 2 raised panelDakota Bolt Handles
  • 3 raised panel
  • Universal/Mauser
  • Winchester
  • Remington

Raised panel bolt handles are used by engravers or gunsmiths who want checker the knob of the bolt handle. The raised area makes it easier to checker the knob.

The Universal/Mauser handle is designed to weld onto the square root of a military bolt after the original handle has been cut off.  These are very popular and produce a nice looking finished product when the welds are cleaned up and all the lines are blended. 

Winchester style knobs emulate the pre-64 Winchester style bolt handle.  They have a large flat base that can be adapted to many types of bolts.

Remington style knobs have a base the can be silver soldered onto a Remington bolt to replace the factory knobs that many shooters would prefer to replace.  The styling of the knob on these handles is more round with a straight shaft, as apposed to the factory design which is oval and has a dog leg in the shaft.  These knobs are not checkered.

Mauser Bolt Handles Finished

All styles arrive “as cast”.  They are made from good quality steel that blues nicely when finished.  They can also be polished to a nice bright finish if that is your preference.

Jig for bolt welding

How to hold the bolt handle for welding. Notice the heat sink in the back of the bolt used to protect the threads during welding.

 

Since forged handles are often a little short the welded replacement also solves this problem.  Anyone practiced at both methods c

ould probably do either in the same amount of time, but the for my money the welded replacement just seems like less work for the result you get.

Dakota bolt knobs are available from http://www.4-dproducts.com.

 

Leave a comment

Filed under Firearms, Gunsmithing, How To, Rifles

Learning About Bergara Barrels

Gunsmiths are always looking for sources for quality barrels.  There are several good makers in the United States.  Douglas, Hart, Krieger and  Pac-Nor to name a few.  Bergara is a Spanish barrel maker.  They recently purchased new equipment that have allowed them to expand operations both in Spain and the U.S.

Shooters of the T.C. Encore™ have probably heard of Bergara Barrels, because they manufacture replacement barrels for the famous Encore™ pistols and rifles.   Accuracy reports from these barrels have been very good.  Of late Bergara USA is offering much more, including tapered barrel blanks for gunsmiths.

Prices are comparable to other barrels in the marketplace.

The video below is an introduction to the manufacturing processes used by Bergara to make barrels.  Pretty interesting if you have never seen a barrel made.  Bergara has invested in some new high-tech gun drills and equipment to manufacture quality barrels in a less labor intensive process.

Leave a comment

Filed under accuracy, Firearms, Gunsmithing, Shooting

Who Says She’s Not a Hunting Dog?

My Hunting Dog

Who Says She’s Not a Hunter.

 

When they were in velvet.

Just for Fun!

Leave a comment

Filed under hunting, Uncategorized